Quote:
|
Originally Posted by golf-a-holic
Kev, this won't be a problem for the clubmaker or for you having them extended 1/2" longer. And as far as shafts go I'm not aware of iron shafts that come in different lengths for a set (particularly steel ones), except for Harrison Tour Stars which are graphite and marked for each of the irons they should be used for as they are frequencied to the iron...a clubmaker will cut the butt end of the shaft to get the length of the particular iron and no extensions are used when building a new set. Where did you hear they used extensions for building a new set? This is incorrect information.
|
I didn't hear that they used extensions on new set, I was wondering if that is what they do. The local Dicks has a new set of TaylorMade HT irons for a great closeout price. The salesman at Dicks has a friend who is a club maker/repair tech who can "blow off" the original grips, epoxy the 1/2" extensions in and put the original grips back on. Then he can adjust the lie angle for me. Looks like I can have all that done for under $100.