golfrewind.com

If I reshaft a Taylormade r7 with an aftermarket shaft, is there anyway to get the original taylormade RE*AX shaft back in it? I would think that I would send it back to Taylormade just as if it had been broken, and needed a reshaft. I'm sure they would charge for that, but I wanted to see if anyone had experience with this. I wanted to see if my reshaft could be undone assuming i didnt like the results of the aftermarket shaft.

as long as taylormade hasn't continued to use that stupid plastic shim, you won't have a problem putting the old shaft back in. otherwise , any golf shop that does reshafting will have them. if you choose your shaft wisely, there will be no need to re-install the old one back in. check your shaft diameter first, it should be a .350 tip. the tp series were .335

So it is possible to re-use a pulled graphite shaft? Most people I talk to say the graphite tip gets ruined in the pulling process, which is why i was wondering if it was possible to have taylormade provide and install the OEM shaft. Thanks for your reply.

sure it is, as long as the tip isn't overheated and burn't.