golfrewind.com

Ive always been wondering how to make and clubs and how long does it take... ive been very interested in how this is done

You can probably make them faster, but the clubs I've made take about a day and a half. I cut the shafts, rough the end that goes in the hosel and epoxy the head to the shaft. The next day, I tape the grip end and apply the grip. Then clean the heck out of it and throw the shaft label on. Grips only take a few minutes to dry. I allow 24 hours for the epoxy to set, even if the container says it would take less time to cure. I always use WD40 as grip solvent and generally use 3M double sided masking-style tape.

It's real easy to assemble a club from components. I'd recommend you take the free 1/2 day class at Golfsmith. You'll learn all you need to know to assemble a club, and get to build a free club you get to keep. Well worth the time for the class. Contact Golfsmith and get signed up and have fun.

thanks alot guys ill def check out that class i knowmy dad has all the stuff i need to make some excelt to hosels and other little thinga magicky