Go Back   Golf Rewind > The Clubhouse > General Golf Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old March 7th, 2006, 09:03 PM
howletus
 
Posts: n/a
Fitting question

Looking to get some new irons to replace my 5+ year old Titleist DCI 962s.
I was fitted for these when I bought them. My specs for these were 1/2" short and 2 degrees flat. I'm currently about a 10 handicap though I've been as low as a 6 before some back problems slowed down my practice and playing routine. I went for a rough fitting a couple months ago and after hitting off the lie board with different clubs the pro told me it looked like I was 2 degrees upright. I could not believe that I could go from 2 flat to 2 upright. I have had some back problems over the last few years but come on. Went home and took apart my swing. Found that at the top of the backswing I was regripping the club causing it to be extremely shut though impact/toe down. I'm pretty sure this is more the cause of my hitting out on the toe on the lie board. I've been hitting everything on the toe with my irons for several months. Why didn't this guy diagnose this before recommending specs? This has got me worried about getting fitted for my new irons. Question: How much consistency should you have developed before being fitted? If you're swinging really bad when you get fitted are they going to fit you with clubs that are compensating for your swing faults? A rare demo day is coming up near home and I want to be ready to get fitted for irons as well as dial in my R7/shaft combination.

Any feedback is greatly appreciated.

Thanks...
Reply With Quote
REGISTER and browse with less advertisements! It's FREE!
  #2 (permalink)  
Old March 7th, 2006, 10:20 PM
accuflex's Avatar
accuflex accuflex is offline
Q-School
 
Join Date: Nov 2005
Posts: 171
Question: How much consistency should you have developed before being fitted?

Obviously the best way to fit someone, is if their swing is repeatable, bad or good, a qualified fitter can work either angle, and help improve upon some faults.

If the swing is not repeatable whatsoever, (the majority of us) then getting fit for physical attributes/measurements, is probably gonna help increase your consistency if you had clubs just not totally fir for you.

make any sense?
Reply With Quote
  #3 (permalink)  
Old March 8th, 2006, 12:48 PM
shadowjack's Avatar
shadowjack shadowjack is offline
Tour Card
 
Join Date: Nov 2005
Location: oregon usa
Posts: 363
Quote:
Originally Posted by accuflex
Question: How much consistency should you have developed before being fitted?

Obviously the best way to fit someone, is if their swing is repeatable, bad or good, a qualified fitter can work either angle, and help improve upon some faults.

If the swing is not repeatable whatsoever, (the majority of us) then getting fit for physical attributes/measurements, is probably gonna help increase your consistency if you had clubs just not totally fir for you.

make any sense?
So, even if I don't trust my swing yet, you'd recomend a fitting? I've been considering a fit but I'm not familiar with the process.
Reply With Quote
Reply
Tags: ,



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick Question about fitting QsKoolgrad Club Making & Repair 4 December 20th, 2006 11:24 AM
Bad fitting greenbull Golf Equipment 26 November 17th, 2006 01:39 AM
Fitting question...prep. ErikGalindo Golf Tips 10 November 7th, 2005 02:22 PM


All times are GMT -4. The time now is 08:51 PM.