Go Back   Golf Rewind > The Clubhouse > Golf Tips

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old August 7th, 2006, 03:43 PM
mcguinness's Avatar
mcguinness mcguinness is offline
Golf Enthusiast
 
Join Date: Jun 2005
Location: dublin,ireland
Posts: 34
drills to stop cutting across

does anyone out there with some golf wisdom have any drils to help stop coming across the ball on the downswing

Last edited by mcguinness : August 7th, 2006 at 05:17 PM.
Reply With Quote
REGISTER and browse with less advertisements! It's FREE!
  #2 (permalink)  
Old August 7th, 2006, 05:24 PM
ringin_in_yer_loins's Avatar
ringin_in_yer_loins ringin_in_yer_loins is offline
Tournament Winner
 
Join Date: Jul 2006
Location: Southern California
Posts: 843
Try putting a tee in the ground a couple inches behind the ball and on the outside of the ball where you would normall come over and across. A water bottle works well too. Try to swing through the ball with out hitting the tee. This will promote coming from the inside out, thus eliminating the dreaded over the top slice you may have. Also, just placing a couple of clubs down (or something straight) on either side of where you're teeing your ball. Face them parallel to each other, toward your intended target. This way you can see the path that you want your club to come into the ball. I like the tee / water bottle method myself. You get instant feedback if you come over the top. Try this out and see what happens. Good luck.
Reply With Quote
  #3 (permalink)  
Old August 8th, 2006, 04:32 PM
threefeathers's Avatar
threefeathers threefeathers is offline
Tournament Winner
 
Join Date: Apr 2006
Location: Denver, CO.
Posts: 639
Quote:
Originally Posted by mcguinness
does anyone out there with some golf wisdom have any drils to help stop coming across the ball on the downswing
Use a mid-iron for this drill (I like a 6, but just so it's a mid-iron). Take a narrow stance and then draw your right foot back about one foot.
Make your full backswing and swing the clubhead into the ball from the inside. Make sure your hands rotate the clubface to the square position. This stance will make it easier to make a full turn on your backswing and it will limit your tendency to cut across the ball from the outside.
Reply With Quote
  #4 (permalink)  
Old August 9th, 2006, 07:30 PM
Ulprus's Avatar
Ulprus Ulprus is offline
Q-School
 
Join Date: Aug 2006
Location: West Yorkshire, UK
Posts: 209
Send a message via MSN to Ulprus
I'd use a Wedge, try and shorten the swing slightley and try setting off on this inside. Practice this really slow (Without a ball) and try and get the feeling that the plane is smooth and that you don't come across coming back down. This may take a few hours to get into the rythem. But it will pay off in the end.
Reply With Quote
Reply
Tags: ,



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
cutting a club karden30 Club Making & Repair 2 October 26th, 2006 04:22 PM
Cutting across the ball jonezy1301 Golf Tips 3 August 22nd, 2006 12:01 AM
Cutting A Shaft Ardee Club Making & Repair 5 February 2nd, 2006 05:40 PM
cutting down clubs mjreisbord Introductions & Greets 4 November 27th, 2005 08:50 AM


All times are GMT -4. The time now is 06:30 AM.