golfrewind.com

hey fellas and ladies ;P

i hav a 2 ball putter and i want 2 draw a line on it so i cna line up putts i hav done this in the past but has never been straight can n e 1 tell me how to draw it strait or can i get it done by a pro or machine or some thing. yes i hav used a ruller but still is on an angel
aurgent help
(yes i cnat spell)

I used some skinny black tape and just stuck it on. Easily removed when it isn't quite straight, or when you realize that it was better without it.

so find the center of each circl and draw a line through both points

how do i find the center of each circle

measure diameter and divide by 2?

how do i find the diamiter lol im not very smart

is diamiter like area

Carpenter's square and square the edge to the blade...Home Depot to answer your next question...

Or just measure the width of each circle and place a dot in the centre, and draw a line from there.

Yeah that is what I was thinking. Any carpenters square or a draftsmen T will do the trick.

Measure the length of the putter face. Divide by two. Use a sharpie and the above to draw line.

If the 2-ball design is not helping you with alignment, I don't see how this lines gonna help.

Use a caliper to measure the diameter. You can buy some cheap plastic ones at home depot. You can also but mearing tapes and leveler that will shoot a red laser line. Mark the spots then use a straight edge to draw your line

Sell your two ball putter, and buy the one with the line already on it.

Sell your two ball putter, and buy the one with the line already on it.




lol yeah i wnat a new putter i hate my 2 ball putter its to big and malloty lol

Just so you know I was actually talking about the one that odyssey actually sell.s